2

I have my Raspberry Pi 3+ since 1 year and suddenly the remote that I use which was the one of my TV does not work anymore. I find that a little weird because I didn't do anything so that work. Can you help me? The OS on my Rapberry Pi 3+ is OSMC/KODI. My TV is a Philips model n° 46PFL5507H/12. I tried to map my remote, but my pi doesn't receive any signal.

Tom Ribardiere
  • 29
  • 1
  • if you recently sudo apt updated and upgraded, then new kernel etc might not like the old LIRCd. If your TV is in the LIRC devices database, you can install it again. Remember to use the most updated tutoriial, 2019 June something, if I remember correctly. And use the "Mode 2" command to make sure you get the space/mark signals. – tlfong01 Oct 22 '19 at 09:00
  • Yes i update and upgrade recently – Tom Ribardiere Oct 22 '19 at 09:03
  • And how can i resolve that ? – Tom Ribardiere Oct 22 '19 at 09:03
  • This is the most up to date tutorial I know: https://raspberrypi.stackexchange.com/questions/104554/lirc-tutorial-for-rpi2b-buster-too-old-problem. Good luck and cheers! :) – tlfong01 Oct 22 '19 at 09:07
  • change the battery in the remote – jsotola Oct 22 '19 at 15:06
  • I aldready did that but it not worked – Tom Ribardiere Oct 22 '19 at 15:27
  • 1
    Can you please edit the question and paste the content of your /etc/wpa_supplicant/wpa_supplicant.conf to it? And please paste also the out of these commands to it: iw dev and iw wlan0 info. – Ingo Oct 22 '19 at 16:09

0 Answers0