I would like to use the mic and usb speaker with Pi2 Jessie. Here is the output from lsusb:
Bus 001 Device 006: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller
Bus 001 Device 005: ID 1130:1620 Tenx Technology, Inc.
Bus 001 Device 004: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Can someone please let me know what needs to be done? The speaker/mic information are as follows: Speaker Mic
I have tried making the necessary modifications
1. Removed the /etc/modprobe.d/alsa-base.conf
2. Modified the /usr/share/alsa/alsa.conf
3. aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: AUDIO [USB AUDIO], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
Did not help.
Adding the output from /proc/asound/cards
pi@raspberrypi:~ $ cat /proc/asound/cards
0 [AUDIO ]: USB-Audio - USB AUDIO
USB AUDIO at usb-3f980000.usb-1.4, full speed
1 [ALSA ]: bcm2835 - bcm2835 ALSA
bcm2835 ALSA
2 [Device ]: USB-Audio - USB PnP Sound Device
C-Media Electronics Inc. USB PnP Sound Device at usb-3f980000.usb-1.5, full spe
